| Author |
 Topic  |
|
|
Mani
United Kingdom
23 Posts |
 Posted - 27 May 2013 : 19:06:50
|
| Thanks for the advice, much appreciated. |
 |
|
|
breakdown
13 Posts |
Posted - 27 May 2013 : 18:49:20
|
Most sports coils with push in H/T ends will be OK
as for the rest of the parts there is a number on you're distributor
usually begins with a 7 any decent automotive parts distributor
should be able to source them from the number |
|
|
|
Mani
United Kingdom
23 Posts |
Posted - 27 May 2013 : 13:18:19
|
| Thanks, will try them as well. |
|
|
|
bigt80
United Kingdom
1052 Posts |
Posted - 27 May 2013 : 10:26:26
|
Hi Mani,
Alpine West Midlands also very helpful.
Club has spares of course & I would think that points, condenser & rotor would be standard Lucas items (DCD1 & DRB1 etc.). I would try and get NOS ones as current new parts are generally poor quality: avoid Intermotor parts of this type too, as also poor quality in my experience. Cheers. G |
|
|
|
Mani
United Kingdom
23 Posts |
Posted - 26 May 2013 : 19:32:59
|
| Thanks for the info, will try them out. |
|
|
|
arrocuda
United Kingdom
501 Posts |
Posted - 26 May 2013 : 09:40:51
|
Speedyspares is the best place for OEM parts I've found.
http://www.speedyspares.co.uk/
Even if what you're looking for is not in the parts catalogue they're a friendly bunch and they'll point you in the right direction if they can.
Building the 'Mark II' fastback Rapier ('Arrocuda'). |
|
|
|
Mani
United Kingdom
23 Posts |
Posted - 25 May 2013 : 12:44:18
|
Hi All,
Need some help with my 1958 Series II Rapier.
Can anyone tell me where I can get a coil part No. HA12 4506 156, the existing one has the HT lead that screws in to it. I have been told that you can get a HT lead push on type but not sure, also I need new points, condenser and rota arm. Thanks Mani |
|
| |
Topic |
|
Coil, points, condenser
