A little more progress today Ran the fuel Line through the car (to avoid damage on stages) even unscrewed the union out of the tank & managed to find a new olive at work ! Trial fitted seats and harnesses to make sure nothing fouls the fuel pipe
Axle should arrive next week so should see some real headway then I can measure up For the hybrid propshaft and get the hydraulic & cable handbrake fitted.
Stripped and poly bushed the front suspension this afternoon Bit of a faf but worth it as the bushes that came off where well and truly goosed Pleased that everything came apart no problem
I was hoping to re use the road springs on the reconned struts but on inspection they have had Coils cut off each end. After measuring and having a think about it I have Sourced Some ford springs which give the same ride height
Tomorrows jobs Re fit struts New bottom ball joints New wheel bearings 4 new track rod ends New Centre steering rod New calipers New discs New green stuff pads Bleed brakes.
Hi Jason, I sent you an o/e stripe sample this morning G.
quote:Originally posted by JPSH120
quote:Originally posted by andyb
jabe1807 H120 badge inserts and stripe sample in the post today
JPSH120 Did you want a sample of the stripe ?
No it's OK Andy but thanks for the offer. I re-measured mine again at the weekend and made some scale samples on the PC. I think I've decided on 50mm & 9mm with a 10mm gap, but would be interested to know what yours are.
jabe1807 H120 badge inserts and stripe sample in the post today
JPSH120 Did you want a sample of the stripe ?
No it's OK Andy but thanks for the offer. I re-measured mine again at the weekend and made some scale samples on the PC. I think I've decided on 50mm & 9mm with a 10mm gap, but would be interested to know what yours are.
my fastback
Posted - 27 Jul 2013 : 21:35:51
[/URL]
[/URL]