| Author |
 Topic  |
|
|
Paul
United Kingdom
60 Posts |
 Posted - 26 Nov 2011 : 15:22:56
|
Christian's cylinder block is the one which prompted the thread about replacing cast iron heads with alloy heads just by swapping the camshaft. With the help of forum member "1922" we eventually decided that some, if not all, Series II Rapier blocks won't take an alloy head without modifications to at least two of the waterways.
Welcome to the forum, Christian.
Le bloc-cylindres du Christian est celui qui a incité le fil au sujet du remplacement des têtes en fonte par des têtes en alliage seulement en échangeant l'arbre à cames. Avec l'aide de membre du forum "1922" nous avons finalement décidé que certains, sinon tous, des blocs de la Rapier série II ne prendra pas une tête en alliage sans également faire des modifications à au moins deux des passages d'eau.
Bienvenue au forum, Christian.
My Alpine won't float!  I need one which does!! |
 |
|
|
johnc
United Kingdom
212 Posts |
Posted - 26 Nov 2011 : 09:44:11
|
Hi Christian,
Welcome to the forum.There are very few members in France,I'm near Lorient where are you?
John |
|
|
|
christian Poreaux
France
1 Posts |
Posted - 26 Nov 2011 : 07:32:14
|
Hello,
I am a french owner of an Alpine serie II.
Now, my Alpine has a block-cylinder n° A3802926 LHX produced the 28-03-1958. So, it comes from a Rapier 2. Originaly, it was equiped with an iron head-cylinder.
As I just bought an alpine serie 2 block-cylinders (which lot of works), I shall propose the Rapier 2 block-cylinders (only the block), when the Alpine block will be ready.
If somebody is interesting and not in hurry, please contact me.
Christian |
|
| |
Topic |
|
|
|
Alpine owner
