| Author |
 Topic  |
|
|
hillman
France
107 Posts |
 Posted - 21 Nov 2021 : 14:44:46
|
I cannot find a reference for the paper type oil filter for my serie 3a.
who can provide me a make and model? thank you |
|
|
Bodiam
United Kingdom
41 Posts |
Posted - 02 Jan 2022 : 18:59:13
|
Hi, Hillman, sorry to be so long replying to your question, I have not looked at the forum for a while so I suspect you may already have answered your own question!
However, I did research this issue some time ago and came up with the following list of filters for your model - Tecalemit K24477, TJ FP3312, Motaquip VFL142, Cooper/Fiam FA4009, WIX 51302, Unifilter U1545, Fram CH820PL, Classic Gold/Unipart GFE104.
Hope this is not too late to be useful. For what it’s worth, I found the GFE104 filter easiest to source locally to me.
John
John D |
 |
|
|
hillman
France
107 Posts |
Posted - 11 Jan 2022 : 17:11:13
|
Hello John, thank you very much, Ireally thought the forum was dead.
I will try to find one ofthese references you sent me.
I am still in trouble with this as all seals are leaking.
thank you
gilles |
|
|
|
Bodiam
United Kingdom
41 Posts |
Posted - 11 Jan 2022 : 21:17:29
|
Hi, Gilles,
Hope you have some luck with them. When you say leaking seals, do you mean the ones at the base of the oil filter casing, if so you are in luck as they usually come with the new filter cartridge, though there is also a small seal which fits under the head of the filter screw - I have some info on that if you need it.
Have recently done a full engine, gearbox and overdrive rebuild and found all the gaskets and seals I needed from various suppliers, so I could tell you where I found mine if you could specify what you need.
Good luck!
John |
|
|
|
hillman
France
107 Posts |
Posted - 13 Jan 2022 : 17:12:10
|
Hello John,
in fact I need to replace the one on the top and the one inside the filter below the spring and washer.
Then I think I will try to find an Alpine serie V base filter with the screw on model.
If you have info about these seals, thank you to send them to me.
Best regards
gilles |
|
|
|
hillman
France
107 Posts |
Posted - 18 Jan 2022 : 09:21:06
|
Hi John,
just to let you know. I found a filter with the cooper fiam reference you kindly gave me. That will be ok .
thank you very much for your help
take care
Gilles |
|
|
|
Bodiam
United Kingdom
41 Posts |
Posted - 28 Mar 2022 : 22:38:40
|
Hi, Gilles,
So sorry, I don’t visit the forum very often and only just noticed your post in January.
Glad you got fixed up with a filter, I guess that would have included the seals for the base of the casing. The other seal you might find you need is the one which fits onto the long bolt and seals below the bolt head (hope that makes sense) There are two types, unfortunately, one by Tecalemit (the bolt has a UNF thread) and one by Purolator (the bolt has a UNC thread). The part number for the Tecalemit one is 37H1173 and for the Purolator is 500321.
I had no luck getting these from Rootes stockists but luckily these units are common on other British cars of the time and I got one of them from a Triumph spares dealer and the other from an MG stockist.
Hope this is useful, if I can help you further please send me a personal message through the forum and hopefully I will pick it up quickly.
Kind regards, John |
|
|
|
hillman
France
107 Posts |
Posted - 29 Mar 2022 : 17:11:08
|
Hello John,
thank you again for your time and the info about triumph and mg seals for the main bolt. I will investigate this.
thank you again and take care
best regards
Gilles |
|
|
| |
Topic |
|
|
|
oil filter reference
