Hi there, Just moved house and can't find my workshop manual- Need to replace the clutch slave cylinder and wondered if there are any obvious snags- replacement sent by speedy spares is approx 3" overall in length with 2 horizontal screw fittings at rear, assume top for bleed nipple and bottom for pipe from master. All advice gratefully received! David
Yes that's correct the bottom is to master and top is bleed nipple. Fairly straightforward to fit- remove rod from clutch arm(held on by split pin) then undo master feed then remove 2 fixing bolts- assembly is reversal of removing. Simply bleed system a d enjoy light clutch feel! Good luck. Ian.
Hi Ian, All replaced and working fine- apologies for late reply! ATB David
quote:Originally posted by IanEndurer
Hi David,
Yes that's correct the bottom is to master and top is bleed nipple. Fairly straightforward to fit- remove rod from clutch arm(held on by split pin) then undo master feed then remove 2 fixing bolts- assembly is reversal of removing. Simply bleed system a d enjoy light clutch feel! Good luck. Ian.
H120 clutch slave cylinder replacement
Posted - 14 Oct 2021 : 13:10:55
