| T O P I C R E V I E W |
| hillman |
Posted - 31 Oct 2019 : 18:09:41
Hello, I am looking for door handle gaskets for my rapier 3a.
Any idea where I could get a pair? thank you |
| 7 L A T E S T R E P L I E S (Newest First) |
| hillman |
Posted - 07 Nov 2019 : 08:02:56
Thank you Peter for this very important information.
gilles |
| pruyter |
Posted - 05 Nov 2019 : 14:15:06
And indeed although the part number for the handles are different the part numbers for the gaskets are the same. So the gasket ment for an Alpine door handle will fit the door handles from a Rapier.
Regards,
Peter |
| hillman |
Posted - 03 Nov 2019 : 15:07:22
Hi tgr747,
thank you for the info. they look very similar I will order a set from them as they will probably do the job.
Thank you |
| pruyter |
Posted - 03 Nov 2019 : 13:32:59
The handles for the Alpines have different part numbers compared to the handles of the Rapier, so I assume this handles are different!
Regards,
Peter |
| tgr747 |
Posted - 03 Nov 2019 : 11:03:47
If the handles are the same as a sunbeam alpine,firms like sunbeam spares co stock them. |
| hillman |
Posted - 01 Nov 2019 : 09:50:20
Thank you Jim,
I will do this if I cant find any new gaskets.
cheers |
| jimlagos |
Posted - 01 Nov 2019 : 08:14:52
I usually use a scrap of old cycle inner tube. fix the handle on top of the rubber trimmed from an inner tube, then VERY carefully trim around the handle with a sharp knife, stretching the rubber slightly so the cut edge hides under the handle.
jim |
