| T O P I C R E V I E W |
| puffin |
Posted - 14 Oct 2021 : 13:10:55
Hi there,
Just moved house and can't find my workshop manual- Need to replace the clutch slave cylinder and wondered if there are any obvious snags- replacement sent by speedy spares is approx 3" overall in length with 2 horizontal screw fittings at rear, assume top for bleed nipple and bottom for pipe from master. All advice gratefully received!
David |
| 2 L A T E S T R E P L I E S (Newest First) |
| puffin |
Posted - 05 Aug 2022 : 10:35:45
Hi Ian,
All replaced and working fine- apologies for late reply!
ATB
Davidquote:
Originally posted by IanEndurer
Hi David,
Yes that's correct the bottom is to master and top is bleed nipple. Fairly straightforward to fit- remove rod from clutch arm(held on by split pin) then undo master feed then remove 2 fixing bolts- assembly is reversal of removing. Simply bleed system a d enjoy light clutch feel!
Good luck.
Ian.
|
| IanEndurer |
Posted - 23 Oct 2021 : 14:03:36
Hi David,
Yes that's correct the bottom is to master and top is bleed nipple. Fairly straightforward to fit- remove rod from clutch arm(held on by split pin) then undo master feed then remove 2 fixing bolts- assembly is reversal of removing. Simply bleed system a d enjoy light clutch feel!
Good luck.
Ian. |
