|T O P I C R E V I E W
||Posted - 31 Jul 2019 : 06:03:32
Hello members, I have installed electronic ignition in my Rapier FB and was seeking advice on what plug gap setting should I use. I run on Aus 98 octane unleaded fuel and am using N9Y equivalent plugs, (NGK BP6ES). Thanks in advance
|4 L A T E S T R E P L I E S (Newest First)
||Posted - 29 Aug 2019 : 17:15:28
Although I don't believe it's necessary, you could slightly increase the spark plug gap and take advantage of a "meatier" spark. I opened mine to .030 from .025. Not sure if it made any difference though!
||Posted - 26 Aug 2019 : 01:06:58
Hi bigaadams, yes, I have a matching high output coil fitted.
||Posted - 23 Aug 2019 : 13:39:34
If you did not change your ignition coil, only the trigger to the coil has been affected by the electronics. If you up the secondary output only then will this necessitate a spark gap change.
||Posted - 31 Jul 2019 : 09:01:56
It should be: .025 inch (.635 mm)